Rancang Bangun Desain Bilah Turbin Angin Taperless Sumbu Horizontal 3 Sudu Menggunakan Material Kayu Mahoni: Studi Eksperimen Sistem Pengereman Elektrik Dynamic Braking dan Performa di Pantai Asmara Jember

Zainal Muttaqien Sulaiman; Yoniva Nandarista Poma; Maulana Alfi Fredyansyah; Marcelino Ricky Merican; Vita Ayu Puspitasari; Muhammad Zainuri

Authors

Zainal Muttaqien Sulaiman Politeknik Negeri Jember
Yoniva Nandarista Poma Politeknik Negeri Jember
Maulana Alfi Fredyansyah Politeknik Negeri Jember
Marcelino Ricky Merican Politeknik Negeri Jember
Vita Ayu Puspitasari Politeknik Negeri Jember
Muhammad Zainuri Politeknik Negeri Jember

Keywords:

Electrical Energy, Mahogany, Taperless, Wind Turbine

Abstract

Wind turbines are one of the environmentally friendly conversion tools with one of the main components being blades. Jember is one of the districts of East Java. The average wind speed in Indonesia is relatively low ranging from 3 m/s to 5 m/s. The potential for wind in Indonesia is available almost all year round, so there is a possibility of developing technology to utilize this energy with some previous limitations. Windmill modifications need to be made that are adapted to low wind speed conditions to be able to produce optimal electrical energy. Therefore, a design of HAWT (Horizontal Axis Wind Turbine) blades using mahogany wood material was made by testing the current, voltage, and wind speed system at Asmara Beach, Jember. This study aims to design and evaluate the performance of a taperless bladed wind turbine made from mahogany wood as an alternative environmentally friendly material. The turbine design is optimized through numerical simulation to achieve maximum efficiency. The results show that wind turbines made from mahogany wood have potential as a promising source of renewable energy, especially in areas with moderate wind speeds.

Downloads

Download data is not yet available.

References

Nurhasanah, R. (2020). Rancang Bangun Turbin Angin untuk Pembangkit Listrik Hybrid One Pole Energy. Power Plant, 8(2), 524017.

Alfaridzi, M. A., & Setiawan, R. (2020, Desember). Analisis Performa Bilah Taperless Dengan Airfoil Naca 4412 Pada Horizontal Axis Wind Turbine Tsd 500 Di Pt Lentera Bumi Nusantara. Jurnal Teknik Mesin Dan Pembelajaran, 3(2), 64-73. Retrieved From Https://Journal2.Um.Ac.Id/Index.Php/Jtmp

Augustiantyo, B., & Setiawan, R. (N.D.). Optimasi Desain Bilah Dengan Metode Linearisasi Chord Dan Twist Terhadap Performa Turbin Angin Sumbu Horizontal. Jurnal Media Mesin, 22(2), 97-110.

Khusnawati, N., Wibowo, R., & Kabib, M. (2022, September). Analisa Turbin Angin Sumbu Horizontal Tiga Sudu. Jurnal Crankshaft, 5(2), 35-42.

Ms, S., & Ibrochim, M. (2009, Juni). Analisa Potensi Energi Angin Dan Estimasi Energi Output Turbin Angin Di Lebak Banten. Jurnal Teknologi Dirgantara, 7(1), 51-59.

Murniati, M. E., & Sudarti. (2021, September). Analisis Potensi Energi Angin Sebagai Pembangkit Energi Listrik Tenaga Angin di Daerah Banyuwangi Kota Menggunakan Database Online-BMKG. JURNAL SURYA ENERGY, 6(1), 9-16. doi:10.32502

Pratiwi, D. A. (2020). Uji Performa Turbin Angin Darrieus 6 Blade Dan Solar Pv Sebagai Sumber Pembangkit Listrik Hybrid Di Pantai Tamban Kabupaten Malang. Jtm, 8 (1), 161-166.

Purdiatama, M. E., Saputro, H., & Wijayanto, D. S. (2018). Studi Numerikal Performansi Turbin Angin Savonius Di Pesisir Pantai Kabupaten Demak. Jurnal Ilmiah Pendidikan Teknik Kejuruan (JIPTEK), 11(2), 52-58. doi:10.20961

Sidik, R. M., Kardiman, & Fauji, N. (2022, Agustus). Rancang Bangun Bilah Turbin Angin Sumbu Horizontal Tipe Taperless Dengan Airfoil Psu94-097 Menggunakan Material Kayu Nangka (Artocapus Heterophyllus). Jurnal Ilmiah Wahana Pendidikan, 8 (14), 406-414.

Tamba, C. N., Simanjuntak, K. S., & Nainggolan, R. (2022). Pengaplikasian Turbin Angin Sebagai Penggerak Dan Penghasil Daya Pada Prototype Smart Boat. Konferensi Nasional Sosial dan Engineering Politeknik Negeri Medan, 999-1009.